4-bit Up Counter with Asynchronous Reset

Intel
Microsoft

Problem Description

Design a 4-bit up counter that increments count by 1 on every rising edge of clk. The counter counts from 0 to 15 and wraps back to 0 automatically on overflow. When rst is asserted high, count resets to 0 immediately — independent of the clock edge. The reset is asynchronous and takes priority over counting.


Interface Definition

Port

Direction

Width

Description

clk

input

1-bit

Positive-edge triggered clock

rst

input

1-bit

Active-high asynchronous reset — resets count to 0 immediately

count

output

4-bit

Registered counter output, 0 to 15, wraps on overflow

All Scenarios

Scenario

count value

What happens

Normal count

0→1→2...15

Increments each posedge ✓

Overflow

15 → 0

Wraps automatically ✓

Async reset mid cycle

any → 0

Resets immediately ✓

Reset at overflow

15 → 0

Reset wins, drops instantly ✓

rst deasserted

0 → 1

Resumes counting ✓

rst held high

stays 0

Count frozen at 0 ✓


Worked Example — Cycle Trace

cycle │ clk event  │ rst │ count │ Decision                        
──────┼────────────┼─────┼───────┼──────────────────────────────────
  1   │ posedge    │  0  │   0   │ rst=0, increment → count=1      
  2   │ posedge    │  0  │   1   │ rst=0, increment → count=2      
  3   │ posedge    │  0  │   2   │ rst=0, increment → count=3      
  ...                                                               
  16  │ posedge    │  0  │  15   │ rst=0, increment → wraps to 0 ✓ 
  17  │ mid-cycle  │  1  │   3   │ rst HIGH → count=0 IMMEDIATELY ✓
  18  │ posedge    │  0  │   0   │ rst=0, increment → count=1      

Verilog

Code Editor Access

Log in to write, run and submit your solution to this interview question. It's free.

Output

Output goes here...