Frequency Divider by 3
Problem Description
Write a Verilog code for a frequency divider by 3. The duty cycle of the output clock should be 50%.
The circuit should have an input for the input clock and the output should be the clock frequency divided by "3".
On reset=0, the circuit should get initialized and the output should be 0.
Example:
rst=0 input_clk=0 output_clk=0
rst=0 input_clk=1 output_clk=0
rst=0 input_clk=0 output_clk=0
rst=1 input_clk=0 output_clk=0
rst=1 input_clk=1 output_clk=1
rst=1 input_clk=0 output_clk=1
rst=1 input_clk=1 output_clk=1Verilog
Code Editor Access
Log in to write, run and submit your solution to this interview question. It's free.
Output
Output goes here...
