Frequency Divider by 4

Problem Description

Design and implement a Verilog module that divides an input clock frequency by 4 and produces an output clock with a 50% duty cycle.

The design should use a synchronous counter-based approach and must satisfy the following requirements:

  • The module shall accept a single input clock input_clk.

  • The module shall generate an output clock output_clk whose frequency is one-fourth of the input clock.

  • The duty cycle of output_clk must be exactly 50%.

  • The design shall include an active-low asynchronous reset (rst).

  • When rst = 0, the counter and output clock must be initialized to 0.

  • On every rising edge of input_clk, the internal counter should increment and control the toggling of output_clk.


πŸ“Š Functional Behavior

Input Clock Cycles

Counter Value

Output Clock

0 β†’ 1

00 β†’ 01

0

1 β†’ 2

01 β†’ 10

1

2 β†’ 3

10 β†’ 11

1

3 β†’ 4

11 β†’ 00

0

This behavior repeats continuously, resulting in a frequency division of 4 with a 50% duty cycle.


βœ… Example

If the input clock is:

1 0 1 0 1 0 1 0 ...

Then the output clock should be:

0 0 1 1 0 0 1 1 ...

🎯 Objective

Implement the Verilog module and verify its functionality using simulation.

Verilog

Code Editor Access

Log in to write, run and submit your solution to this interview question. It's free.

Output

Output goes here...