A designer is tasked with creating a clock frequency divider in RTL that takes a 100MHz clock and outputs a 33.33MHz clock (divide-by-3) with exactly a 50% duty cycle. Which of the following design approaches is fundamentally required to achieve this specific duty cycle?
To achieve a 50% duty cycle on an odd division ratio (like divide-by-3), the output signal must remain high for 1.5 clock cycles and low for 1.5 clock cycles. Since 1.5 cycles cannot be counted using only one edge of the clock, the design must utilize both the rising and falling edges of the source clock to toggle the output at the half-cycle mark.