During backend-of-line (BEOL) manufacturing, long isolated metal interconnects can accumulate localized static electrical charge during plasma etching. If this metal is connected to the gate of a MOSFET, the charge can exceed the gate oxide's breakdown voltage, permanently destroying the transistor. What is this phenomenon called, and what is the standard physical design technique to fix it?
This is the exact definition of the Antenna Effect (or Plasma Induced Damage). The accumulated charge acts like an antenna. It is typically resolved by two methods: 1) Diode insertion (adding a reverse-biased PN junction near the gate to bleed off the charge into the substrate), or 2) Metal Hopping/Jumpers. By breaking the long wire and routing it up to a higher metal layer, the long segment is disconnected from the delicate gate during the lower-level plasma etching process. The connection is only completed later in the manufacturing process when the higher metal layer is deposited, by which time the risk is mitigated.